DNM PIP APIs

VpnList

Method
Description

POST

vpnlist-post

https://digitalconnectproxyuat.verizon.com:443/DynamicBandwidthMock/privateip/vpnlist

It is a request to fetch the VPN list which contains VPN Id, VPN name, Number of Sites under each VPN, Site Id and Location of VPN for each Virtual Private Network of a Verizon network’s user.

OrderHistory

Method
Description

POST

orderhistory-post

https://digitalconnectproxyuat.verizon.com:443/DynamicBandwidthMock/privateip/orderhistory

It is a request to get the Order History details like OrderHistoryId, OrderStatus,Statusdate,Username of all states the order went through for a specific OrderId of the Verizon network Circuit.This API provides various intermediate steps involved to complete a DNM order for a specific OrderId .

ServiceAdminUpAndDown

Method
Description

POST

serviceadminupanddown-post

https://digitalconnectproxyuat.verizon.com:443/DynamicBandwidthMock/privateip/serviceadminupanddown

It is a request to update the Admin Status of an Interface to no-shutdown or shutdown for a Circuit Id of the Verizon network.Note: You can refer to Admin Status API to get the available admin status options.

AdminStatus

Method
Description

POST

adminstatus-post

https://digitalconnectproxyuat.verizon.com:443/DynamicBandwidthMock/privateip/adminstatus

It is a request to get the available options for Admin Status for a Circuit Id of the Verizon network. Based on the available Admin Status options you can go to Service Admin Up and Down to change admin status.

ShapingAdjusts

Method
Description

POST

shapingadjusts-post

https://digitalconnectproxyuat.verizon.com:443/DynamicBandwidthMock/privateip/shapingadjusts

It is a request to fetch the possible Shaping Adjust list of a Circuit of the Verizon network.Note: The output of this API can be used in Service Shaping Adjust Update to change Shaping adjust.

MassServiceSpeedChangeOnDemand

Method
Description

POST

massservicespeedchangeondemand-post

https://digitalconnectproxyuat.verizon.com:443/DynamicBandwidthMock/privateip/massservicespeedchangeondemand

API provides capability to update Port Speed for a List of Verizon Circuits which are entitled for dynamic change, Multiple transactions in a day are supported for VRD circuits, but for legacy circuits you must wait for 24 hours after the a transaction is issued. This API is same as “ Increase Decrease Port Speed “ but it can be used for multiple circuits on the same time.In case of multiple transactions Maximum speed for the day will be considered for billing and speed from last successful transaction will be carried over to next day.Note: Available Port Speeds API can be used to provide list of available port speeds for a given circuit.

CircuitList

Method
Description

POST

circuitlist-post

https://digitalconnectproxyuat.verizon.com:443/DynamicBandwidthMock/privateip/circuitlist

It is a request to fetch the Circuit List information like Circuit Id, PVC Id and circuit location for each circuit of a Verizon network’s user.

StaticRoutes

Method
Description

POST

staticroutes-post

https://digitalconnectproxyuat.verizon.com:443/DynamicBandwidthMock/privateip/staticroutes

It is a request to fetch the Static Routes list which are present in the router and which are removed from the router for a Circuit of the Verizon network.

ServiceBgpUpdate

Method
Description

POST

servicebgpupdate-post

https://digitalconnectproxyuat.verizon.com:443/DynamicBandwidthMock/privateip/servicebgpupdate

It is a request to update the BGP Routing Variables details for a Circuit Id of the Verizon network.AS Number - BGP autonomous system number for the current network.AS Override - Replaces your AS Number with our AS number if the source and destination AS numbers are the same.Send Community - Allows you to send standard communities to us and we will send across the cloud.Advertisement Interval - Changes default BGP advertisement timers from 30 seconds to 0 seconds. Distribute List - Site will see a default route only.MD5 Password and Level - MD5 authentication password and encryption level.

OnDemandQualityOfServiceChange

Method
Description

POST

ondemandqualityofservicechange-post

https://digitalconnectproxyuat.verizon.com:443/DynamicBandwidthMock/privateip/ondemandqualityofservicechange

API provides capability to update QOS (Quality Of Service) parameters of Verizon circuit.Multiple transactions in a day are supported for VRD circuits, but for legacy circuits you must wait for 24 hours after the a transaction is issued.You can upgrade or downgrade the Gold CAR (EF Real Time) value within the limitation of Gold CAR. Minimum Gold CAR value is 0K, and the maximum Gold CAR value is set to DS3, not to exceed the Logical Port Speed. Increasing Gold CAR has a CPE performance impact. If you have questions, contact your account team before submitting this change.Note: CAR Details API can be used to provide list of available CAR speeds for a given circuit.

Bandwidth

Method
Description

POST

bandwidth-post

https://digitalconnectproxyuat.verizon.com:443/DynamicBandwidthMock/privateip/bandwidth

API provides capability to update Port Speed & Car Speed for a specific Verizon Circuit which is entitled for dynamic change, Multiple transactions in a day are supported for VRD circuits, but for legacy circuits you must wait for 24 hours after the a transaction is issued. In case of multiple transections Maximum speed for the day will be considered for billing and speed from last successful transaction will be carried over to next day.Note: Available Port Speeds, CAR Details can be used to provide list of available port speeds and CAR speeds for a given circuit.

ServiceStaticRouteUpdate

Method
Description

POST

servicestaticrouteupdate-post

https://digitalconnectproxyuat.verizon.com:443/DynamicBandwidthMock/privateip/servicestaticrouteupdate

It is a request to update the Static Route of a Circuit Id of the Verizon network. Static routes can be added or removed with any routing protocol.

AvailablePortSpeeds

Method
Description

POST

availableportspeeds-post

https://digitalconnectproxyuat.verizon.com:443/DynamicBandwidthMock/privateip/availableportspeeds

It is a request to get the Available Port Speeds for a Circuit Id of the Verizon network. Before sending Port Speed list Verizon is checking for Network constraints to see if there is enough capacity to support these speeds and sending only the filtered values.Note: You can make use this response to work with Bandwidth, Increase Decrease Port Speed and Mass Service Speed Change Ondemand APIs to change port speed.

CircuitDetails

Method
Description

POST

circuitdetails-post

https://digitalconnectproxyuat.verizon.com:443/DynamicBandwidthMock/privateip/circuitdetails

It is a request to fetch the Circuit Details like Circuit Id, Billing Information, location, Port speed, Car speed, Router information, Port speed and CAR speed change entitlement, MVRF information, VPN name for a Circuit Id of Verizon network.

IncreaseDecreasePortSpeed

Method
Description

POST

increasedecreaseportspeed-post

https://digitalconnectproxyuat.verizon.com:443/DynamicBandwidthMock/privateip/increasedecreaseportspeed

API provides capability to update Port Speed for a specific Verizon Circuit which is entitled for dynamic change, Multiple transactions in a day are supported for VRD circuits, but for legacy circuits you must wait for 24 hours after the a transaction is issued.In case of multiple transections Maximum speed for the day will be considered for billing and speed from last successful transaction will be carried over to next day.Note: Available Port Speeds API can be used to provide list of available port speeds for a given circuit.

EbgpRoutingDetails

Method
Description

POST

ebgproutingdetails-post

https://digitalconnectproxyuat.verizon.com:443/DynamicBandwidthMock/privateip/ebgproutingdetails

It is a request to fetch the EBGP Routing parameter details for a Circuit of the Verizon network.

CarDetails

Method
Description

POST

cardetails-post

https://digitalconnectproxyuat.verizon.com:443/DynamicBandwidthMock/privateip/cardetails

It is a request to get the Available Car Speeds for a Circuit Id of the Verizon network. Before sending Car Speed list Verizon is checking for Network constraints to see if there is enough capacity to support these speeds and sending only the filtered values.Note: The output of this API can be used to change CAR on Bandwidth, Ondemand Quality of Service Change APIs.

OrderDetails

Method
Description

POST

orderdetails-post

https://digitalconnectproxyuat.verizon.com:443/DynamicBandwidthMock/privateip/orderdetails

It is a request to fetch Total number of Orders and Details of all Orders like OrderId, Order Status, Circuit ID, Billing information, Order Requested Date, Order Status Date, Type of Order for a specific Circuit of the Verizon network.

ServiceShapingAdjustUpdate

Method
Description

POST

serviceshapingadjustupdate-post

https://digitalconnectproxyuat.verizon.com:443/DynamicBandwidthMock/privateip/serviceshapingadjustupdate

It is a request to update the Shaping adjust of a Circuit Id of the Verizon network. The Ethernet cards handle shaping and policing based on L2 overhead. In the case of Ethernet encapsulation when shaping, the router does not include Inter-Frame Gap (IFG), Preamble, Start Frame Delimiter (SFD). The total Ethernet overhead that is not included when shaping on the PEs is 20 bytes per frame on ESRs, and 24 bytes for frame on GSRs. When dealing with small frames, this overhead could be considerable. The marketed sold Ethernet speeds and the transmission equipment assumes L1 payload. To adjust for this discrepancy, the shaping rate on the PEs can be adjusted to compensate for the Ethernet overhead depending on the type of service that the customer is buying (voice, voice/data combined, data).Note: Refer to Shaping Adjusts API to get the available Shaping adjust options.